LDLTA Series Large Diameter Gages

The LDLT series gage uses 1:1 ratio lever principle. This method of motion transfer is used in conditions of limited accessibility such as face grooves. This low friction transfer is also ideal for checking shallow angles at specified depths without incurring binding in the transfer.

Display

Features

LDLTA Series Large Diameter Gages Features:

Standard with part #2DM125-05 .0005" graduation dial indicator.
Reverse action lever available.
Gaging heads rotate 180 degrees for ID or OD measurement.
Standard gaging depth range is 0-2".
Standard frame clearance is 1.25". Contact us for a quotation if additional clearance is required.
Available in carbon fiber.

Models

Title	Material	Travel/Opening	Range	Gaging Depth
LDLTA-36 Carbon Fiber	Carbon Fiber	.100"	30 to 36" / 761 to 915mm	0-2"
LDLTA-42 Carbon Fiber	Carbon Fiber	.100"	36 to 42" / 916 to 1070mm	0-2"
LDLTA-48 Carbon Fiber	Carbon Fiber	.100"	42 to 48" / 1071 to 1220mm	0-2"
LDLTA-54 Carbon Fiber	Carbon Fiber	.100"	48 to 54" / 1221 to 1370mm	0-2"
LDLTA-60 Carbon Fiber	Carbon Fiber	.100"	54 to 60" / 1371 to 1525mm	0-2"
LDLTA-12	Steel	.100"	6 to 12" / 150 to 300mm	0-2"
LDLTA-18	Steel	.100"	12 to 18" / 301 to 460mm	0-2"
LDLTA-24	Steel	.100"	18 to 24" / 461 to 610mm	0-2"
LDLTA-30	Steel	.100"	24 to 30" / 611 to 760mm	0-2"
LDLTA-36	Steel	.100"	30 to 36" / 761 to 915mm	0-2"
LDLTA-42	Steel	.100"	36 to 42" / 916 to 1070mm	0-2"
LDLTA-48	Steel	.100"	42 to 48" / 1071 to 1220mm	0-2"
LDLTA-54	Steel	.100"	48 to 54" / 1221 to 1370mm	0-2"
LDLTA-60	Steel	.100"	54 to 60" / 1371 to 1525mm	0-2"
LDLTA-12 Carbon Fiber	Carbon Fiber	.100"	6 to 12" / 150 to 300mm	0-2"
LDLTA-18 Carbon Fiber	Carbon Fiber	.100"	12 to 18" / 301 to 460mm	0-2"
LDLTA-24 Carbon Fiber	Carbon Fiber	.100"	18 to 24" / 461 to 610mm	0-2"
LDLTA-30 Carbon Fiber	Carbon Fiber	.100"	24 to 30" / 611 to 760mm	0-2"

Options

Accessories

High Amp Perpendicular Indicator Unit

Resources

Attachment Size
ldlta & ldltf series.pdf 597.35 KB